The maintenance of automatic doors is key to ensuring their correct operation and extending their useful life as much as possible.

At Portalum, to avoid problems and have optimal maintenance, we teach you some essential tips and tricks. Read.

Correct Maintenance of Automatic Doors: Main Tips

Engine Maintenance

When we talk about engine maintenance, we mean checking and checking all the inlet and outlet lines.

This work is recommended to be carried out by specialized technicians who will be responsible for verifying that the engine is in good condition and detecting any possible problem that may arise.

Check Cables and Mechanisms

Cables and safety mechanisms, such as the control panel, relays, photocells and safety bands, should be inspected regularly for possible damage.

Rodents, for example, can cause unexpected damage, so it’s important to check everything thoroughly.

Proper cleaning of the Automatic Door

Keeping the doors clean avoids possible failures and breakdowns in the future but, how should you do it?

• 1. Regular cleaning: It is essential to keep the doors clean to avoid problems. Depending on the type of automatic door you have, you will need to clean the guides on which it moves, as well as the internal mechanisms to ensure optimal operation.

• 2. Prevents dirt buildup: Accumulated dirt can obstruct the proper operation of the automatic door. Therefore, it is important to carry out regular cleaning to prevent dirt from accumulating and causing problems.

• 3. Be careful with humidity: Humidity can be an enemy of automatic doors, as it can promote the oxidation of the mechanisms. Dry the doors well after cleaning them and prevent moisture from accumulating in the most sensitive areas.

• 4. Insects: Insects can be a problem for the internal mechanisms of automatic doors. To prevent them from becoming an inconvenience, use insecticides and repellents to keep them away.

Other articles that may interest you:

• What is Extruded or Extruded Aluminum?
• How to Choose a Commercial Door
• Best Types of Sliding Garage Doors
• Modern Store Facade Design Tips

Other maintenance tips for your automatic doors

Avoid moisture and water

Avoiding moisture and water is important to keep your automatic doors in optimal condition. The control panel that regulates the automatic doors must always be away from these elements.

Although it is generally well protected, it is advisable to check it from time to time to make sure it is perfectly insulated.

Check the electric hob

To keep your automatic doors in good condition, it is crucial to check the electrical plate regularly. If you start noticing malfunctions in your door, it’s likely that some component of the electrical hob is damaged.

If you have knowledge of electronics, you could identify and fix the problem yourself. However, if you don’t feel confident, it’s best to contact the supplier to check and replace the damaged part.

Check the springs and grease from time to time

Springs, those parts that help maintain tension and facilitate the movement of the door, tend to deteriorate over time. Constant movement and oxidation can speed up this process. Therefore, you should apply a specific lubricant to the springs on a regular basis.

If you notice that the springs have lost tension, do not hesitate to contact the supplier for replacement. Regular cleaning is also essential to prevent future failures in automatic doors. Remember to keep the slides where the sliding doors move clean, as dirt can hinder their operation.

Regular cleaning

Make sure to clean the guides where the doors travel, whether they are sliding or rolling. Remove any debris that may obstruct their movement. Then, check the internal components, such as the springs, and clean them to prevent premature wear.

Avoid insects

In hot weather, such as summer, is when the insect population usually increases. Therefore, it is the perfect time to use insecticides or repellents to keep these invaders at bay and away from your automatic doors.

Automatic Door Maintenance Regulations

The regulations for the maintenance of automatic doors are key to guaranteeing their correct operation and safety. According to the European standard UNE EN 16005:2012, it is mandatory to have a specialized company to carry out periodic inspections.

These checks must be carried out by qualified technicians every 6 months, adapting to the characteristics of each door.

During the preventive check, tasks such as cleaning, greasing, checking cables and connections, checking safety systems, motor and electrical elements are carried out. In addition, the motor and gears are prevented from being exposed to moisture, which helps to extend the life of automatic doors.

Portalum: your Automatic Door Company with the Best Maintenance

We are Portalum, with more than 15 years of experience in the manufacture of state-of-the-art doors, we have become a benchmark in the sector.

We pride ourselves on offering a comprehensive service, from manufacturing to assembly, ensuring that each door goes through strict quality controls to ensure its optimal functioning. Our professional technical team is ready to face any challenge and adapt to the specific needs of each project.

At Portalum, innovation is part of our DNA. We are constantly updated in the market and in the latest technologies, which makes us one of the most avant-garde manufacturers in the sector.

Our commitment to research and development allows us to offer state-of-the-art automatic aluminum doors, with impeccable design and guaranteed safety.

If you need more information about our doors and maintenance, do not hesitate to contact us, we will advise you throughout the process.